Difference between revisions of "Configure vncserver on Ubuntu"

Revision as of 12:09, 19 June 2014

Ubuntu version 12.04 through the latest tested (14.04) the default VNC Server only lets you connect remotely once the user has logged into Gnome or XFCE. This is not useful for a remote headless system. To configure the VNC Server to start with the system and listen before a user is logged in locally the vncserver must be configured to start with the system services. Obviously you need x11vnc installed before proceeding. Once installed...

First set a master password.

sudo x11vnc -storepasswd /etc/x11vnc.pass

Now an init script needs to be created so the vncserver starts at boot.

sudo vi /etc/init/x11vnc.conf

Creating an init script called xllvnc.conf in the /etc/init directory. Now add the following code to the script:

start on login-session-start
script /usr/bin/x11vnc -xkb -auth /var/run/lightdm/root/:0 -noxrecord -noxfixes -noxdamage -rfbauth /etc/x11vnc.pass -forever -bg -rfbport 5900 -o /var/log/x11vnc.log
end script

If you're using Ubuntu the xllvnc binary should be in the path /usr/bin/xllvnc. You can test to make sure it is installed and present in that path location by typing

file /usr/bin/xllvnc

When you reboot the system the VNC Server should be running. You can connect remotely prior to a local user starting a desktop session, or afterwards. You can start a desktop session remotely via vncviewer. It will be a shared session. You will see the same thing and will be controlling the same desktop that the local user is using. There is a way to have it create a separate session, however, that is not covered here.

REFERENCES AND SOURCES;

• VNC from boot on Ubuntu 13.04
• X11vnc as boot loaded service