The following lines were added (+) and removed (-):
== Common Power Saw Examples ===== JigSaw ===A jigsaw power tool is a jigsaw made up of an electric motor and a reciprocating saw blade. They are useful for cutting through thin woods such as plywood. The blades are small, weak and entirely unsupported at the lower end. To guide a jigsaw on curved cut, it must be steered and not forced to move sideways. The usage of sharp blades is important also to get high quality cuts.=== Sawzall ===This is a type of saw in which the cutting action is achieved through a push and pull reciprocating motion of the blade. The word Sawzall is actually a trademark of the Milwaukee Electric Tool Company. A Sawzall is also known as a reciprocating saw, or Saber Saw. It has a large blade resembling that of a jigsaw, although much larger. The handle is oriented to allow the saw to be used comfortably on vertical surfaces. The saw has a base plate where the blade attaches to the saw body. The user rests base plate against the surface being cut so that the tendency of the blade to push away from or pull towards the cut as the blade travels through its cycle can be countered. === Skilsaw ===Also known as a circular saw, the Skilsaw (or Skil Saw) uses a disc blade to cut different materials using a rotary motion spinning around an arbor. In carpentry the term Skilsaw or circular saw refers specifically to the hand-held type. The word Skilsaw is actually a trademark of SKIL Power Tools Company, currently a subsidiary of the Robert Bosch Tool Corporation. Shop teachers and carpentry schools typically avoid using the legacy term Skilsaw in favor of circular saw. This saw is probably the most frequently used power tool by most carpenters.=== Table Saw ====== Mitre saw ==Also known as Miter Saw, this is a powerd Mitre box in the form of a circular blade chop saw used for making precision crosscuts and miter cuts in wood or other materials. Common uses include framing operations and the cutting of molding and trim. === Radial arm saw ===When a circular saw is mounted to a frame with a sliding horizontal arm, it is known as a radial arm saw. It is a large chop saw The terms Jig Saw, Saber Saw (Sabre Saw) and Sawzall have been confused by individuals of different degrees of time in the carpentry trade. It used to be that a Jig Saw was a saw with a blade fastened at both ends with a small table to lay the work onto and do intricate cuts and a sabre saw was a hand held device with a reciprocating blade and a base plate to do free cutting of patterns or straight cuts.The terms Jig Saw / Jigsaw, Saber Saw (Sabre Saw) and Sawzall have been confused by individuals of different degrees of time in the carpentry trade. It used to be that a Jig Saw was a saw with a blade fastened at both ends with a small table to lay the work onto and do intricate cuts and a sabre saw was a hand held device with a reciprocating blade and a base plate to do free cutting of patterns or straight cuts.