M-Audio Fast Track Pro

From Free Knowledge Base- The DUCK Project: information for everyone
Revision as of 12:57, 11 April 2014 by Admin (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Two Amplifier Configuration

Problem: even though outputs 1&2 as well as outputs 3&4 are selected, audio is not received by both amplifiers.

Maudiofasttrackpro01.png 

Control Panel
+---Sounds and Audio Devices
    +---Audio
        "Sound and Playback Devices"
           Fast Track Pro Out 1/2
           RealTek HD (or whatever onboard)
           Fast Track Pro Out 3/4

and in the M-Audio U/I

Maudiofasttrackpro02.png

How does the user select both 1/2 and 3/4 so sound goes out all channels (necessary for L&R amp 1 and L&R amp 2 ?

There is currently no known solution. It seems to be a limitation.

Workaround: connect the second amp to the headphone out on the front of the M-Audio Fast Track Pro. Make sure A/B button is OUT.

Additional Comments: If your DJ software supports output to both 1/2 and 3/4 and can mix the channels, you can accomplish it with software. Windows will not do it for software that does not support the extra channels. It is a feature of the sound device that has to be specifically supported by software.

 

Retrieved from "https://wiki.robotz.com/index.php?title=M-Audio_Fast_Track_Pro&oldid=8727"