Dish Network Systems
Contents
- 1 Receivers
- 1.1 Model 2800
- 1.2 Model 3900
- 1.3 Model 111 DishPro
- 1.4 Model 301
- 1.5 Model 311
- 1.6 Model 322 Dual Tuner
- 1.7 Model 501
- 1.8 Model 508
- 1.9 Model 510 DVR
- 1.10 Model 522 DVR
- 1.11 Model ViP612 DVR
- 1.12 Model ViP622 DVR
- 1.13 Model 721 DVR
- 1.14 Model ViP211
- 1.15 Model ViP222
- 1.16 Model 625
- 1.17 Model ViP722 DVR
- 1.18 Model 811
- 1.19 "Player" Model 921 DVR
- 1.20 Model 6000U
- 2 Dishes
- 3 Dish Parts and LNB Information
Receivers
Model 2800
2800 Legacy SD Single-Tuner IR Receiver
Model 3900
Model 111 DishPro
Entry-level compact satellite receiver often used for add on televisions in the home.
Model 301
A very common entry level receiver often bundled with Dish 500 systems. The smart card is removable.
Model 311
Same as the model 301 except less desirable because the smart card is built in. There is still a slot for adding a new smart card if and when Dish Network distributes them.
Model 322 Dual Tuner
Dual tuners means you can have two TV sets connected for viewing two different channels simultaneously; for TV in another room. Use RF remote for around home control.
Model 501
Receiver and DVR combination unit.
Model 508
Essentially the same as model 501.
Model 510 DVR
Receiver and DVR combination unit with extended storage, 120gb drive for approx 100 hrs.
Model 522 DVR
Dual tuner receiver and DVR combination unit with extended storage, 120gb drive for approx 100 hrs.
Model ViP612 DVR
Model ViP622 DVR
Model 721 DVR
Dual tuner receiver and DVR combination with advanced pause live TV capabilities, PIP, 120gb drive.
Model ViP211
Model ViP222
Model 625
Model ViP722 DVR
Dual tuner HD receiver with DVR.
Model 811
"Player" Model 921 DVR
Dual tuner satellite receiver with DVR combined SD and HD with PIP. Video on demand, pause live TV, 250gb drive, up to 180 hours, RF remote standard.
Model 6000U
720p or 1080i HDTV receiver. Outputs 720p or 1080i HDTV resolutions. SD and HD.
Dishes
Dish 300 Single
Legacy Dual Ouput LNBF and 18 inch round dish. Use to receive from 61.5 or 148 degree echostar. Can also add to a Dish 500 setup using Twin LNB and a DP34 multiswitch to distribute 101, 119, and 61.5 satellite. Some have Winegard printed on the dish face. Optimized for Dishnetwork, ExpressVU. One LNB allows two receivers to be connected. This original Dish Network dish design, used to receive programming from a single high powered DBS-band satellite, is now mostly in use by customers requiring the use of a second dish in order to receive local programming.
- 18" : 110°
Dish 500 Single
- 20" : 110°
Dish 500 Dual Dish Pro LNBs
Dish 500 with two Dish pro single LNB's to receive signals from Echostar 7 (110) and from Echostar 6,8 (119).
- 18"x23" : 110°, 119°
Dish Pro 500
Made for Dish Network by Winegard with DishPro Plus Twin LNBF used to pickup the Echostar 110 and 119. LNB features a built-in DP21 videopath multiswitch compatible with all newer "DishPro" receivers. Older units equipped with they legacy twin LNB, newer equipped with DishPro Plus twin LNB.
- 18"x23" : 110°, 119°
Dish Pro 500 Plus
Dish 500+ adds a third LNB. Receive from satellites 110°, 119° DBS-band and the 118.75 FSS Ku-band satellite. This dish replaces previous 500 models which could not do the 118.75 satellite.
- 20"x24" : 110°, 119°, 118.7°
Super Dish 105
Can receive from 3 satellites, replaces earlier Dish 500 which could only receive from 2. The 105 SuperDISH is pointed to receive signals from Dish Network satellites at 105, 110, and 119 degrees West. SuperDish was the first design by Dish Network to receive satellite programing from the core 110/119° DBS-band satellites and also programming from either the 105° or 121° FSS Ku-band satellites. Local programming for selected markets were originally broadcast using the FSS Ku-band satellites. Recently, Echostar has migrated many local markets to the new 118.75° satellite to allow most U.S. customers to receive it as well as nationwide high definition programming from a single dish. Currently, there remain a few selected local channel markets that require the use of a SuperDish to receive local channels. These markets will require a second dish if they wish to receive high definition programming.
- 36"x20" : 105°, 110°, 119°
Super Dish 121
Can receive from 3 satellites, replaces earlier Dish 500 which could only receive from 2. The 121 SuperDISH is pointed to receive signals from Dish Network satellites at 110, 119, and 121 degrees West. Appearance nearly the same as 105. Just like the 105 the 121 is a legacy dish.
- 36"x20" : 110°, 119°, 121°
Dish 1000
DISH 1000 legacy provided reception from the 110, 119 and 129. Replaced by Dish 1000.2.
- 20.5"x22.5" : 110°, 119°, 129°
Dish 1000.2
The Dish 1000.2 antenna gives you the advantage of receiving more programming (such as HD) using a single dish solution. Reception from 110, 119 and 129 and allowing 3 receivers. Can also add a second dish. International programming from 119 available. 3 outputs DISH Pro separators can be used to create up to six outputs from the dish. Compatible with DISH Pro single-orbital LNBFs or DISH Network bandstacked LNBFs, and DISH Pro Plus 44 switch.
- 23.8"x30.9" : 110°, 119°, 129°
Dish 1000 Plus
The DISH 1000+ supports reception from 4 satellites. Includes a DP Dual Band LNBF and two DP Dual LNBF. The DP dual band LNBF receives 118.7 and 119 while the 2 DP Single LNBFs receive 110 and 129. Install using a DPP 44 switch. Works with any Dish Pro or Pro Plus receiver from Dish Network. Primarily used to receive nationwide high definition programming, delivered form the 129° satellite. The elliptical Dish1000+ design replaces the Dish1000 design, which did not receive the 118.75 FSS Ku-band satellite.
- 23.8"x30.9" : 110°, 118.7°, 119°, 129°
Dish Parts and LNB Information
Dish 1000+ LNB (LNBF) Assembly
Dish 1000+ Reception and Satellite Positions
From the Midwest U.S. this illustration shows the satellite positions with respect to reception on a Dish 1000+ antenna.
