Iambic Keyer

From Free Knowledge Base- The DUCK Project: information for everyone
Revision as of 22:07, 13 April 2017 by Ke0etz (Talk | contribs)

Jump to: navigation, search

Also known as Iambic Paddles, or Iambic Key.

An iambic keyer consists of two separately actuated switches. Iambic operation is useful for sending characters that have alternating patterns such as a period or the letter C. The "iambic" function is created with an electronic keyer by squeezing the paddles together. The squeezing produces alternating dits and dahs similar to a sequence of iambs in poetry, which is where it gets its name.

Although a single paddle keyer also utilizes separate contacts for dits and dahs, there is no ability to make both contacts simultaneously by squeezing the paddles together. Iambic keying by squeezing the paddles together creates alternating dits and dahs. This is supposed to increase speed and create a convenience or ease in sending cw.

Iambic-left-hand320.gif

Mode A and B

Mode A and B refer to the way that a Morse code keyer handles iambic (squeeze) keying so first, let’s define iambic keyer operation. An iambic keyer will send an alternating sequence of dits and dahs as long as both the dit and dah switches are depressed or squeezed.

The difference between mode A and B lies in what the keyer does when both paddles are released. The mode A keyer completes the element being sent when the paddles are released. The mode B keyer sends an additional element opposite to the one being sent when the paddles are released.

You can tell the basic difference between the modes with the letter C. In mode A you could squeeze both paddles (dah before dit) and you would let go of both after hearing the last dit. With mode B, you start the same BUT let go of both paddles after hearing the second

  • dah*.

Slap Keying

Single lever keying is sometimes called slap keying since you can only depress either the dit (slap to the right) or dah (slap to the left). If you use a dual lever keyer such as an Iambic keyer only slapping to the left or right, then you are slap keying. This is fine, however, it does not utilize the "iambic" functionality of the key.

Simply put, if you don't squeeze the dual lever paddle then it will work just like a single lever paddle.[[Category:Radio]