Pico Install Instructions 4 Port CCTV DVR Card

From Free Knowledge Base- The DUCK Project: information for everyone
Revision as of 20:47, 2 April 2008 by Admin (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Installation of Card

Insert the card into one of the empty PCI slots, just as how you would install a sound card. Then turn on the computer. Your computer should recognize the new harddware, then choose installing the driver from CD. The capture card should be recognized as "IMAVISION Video Capture Device" and "IMAVISION Audio Capture Device." See "Installation Guide.doc" for details on hardware installation. This program is tested to be compatible with Windows 98 and newer versions including Windows XP.

Software Setup Please follow the steps below exactly in order to eliminate any potential issues.

  1. Set the screen resolution to 800x600.
  2. Double click "setup.exe" on the CD.
  3. Choose "Peaqe_104 (NTSC Application)" when prompted. Choose either "Indeo 5" or "MPEG4" as video codec.

 

 

Retrieved from "https://wiki.robotz.com/index.php?title=Pico_Install_Instructions_4_Port_CCTV_DVR_Card&oldid=2585"