CD Rip and Burn From the Linux Command Line

  -o)/ /  (_)__  __ ____  __                   Derek Winterstien
  /\\ /__/ / _ \/ // /\ \/ /                   r.o.a.c.h.@.r.o.b.o.t.z...c.o.m
 _\_v __/_/_//_/\_,_/ /_/\_\ 
`
Creation Date: Thu Sep  2 14:38:14 CDT 2004                   current ver 0.10
------------------------------------------------------------------------------
This is a companion guide to the disk-archiving notes.  This guide focuses on
duplicating cdrom media, audio cdrom, cd recording and archiving.
------------------------------------------------------------------------------

Create, Verify, and Burn a data cdrom disc

 (a). Create a directory to place your data in.  Place all directories and
      data files you wish to burn to a cd into this directory. Perhaps you
      create the directory 'burnme' under /tmp 

 (b). Create an ISO image from this data.

 command: mkisofs -o datacollection.iso -R -J -r /tmp/burnme

 (c). You may browse this ISO image to ensure data integrity prior to
      deletion of your archive folder 'burnme'.

 command: isoinfo -i datacollection.iso -f -R -J  | less

 (d). Now that you have deleted 'burnme' all you have is your ISO file.  Burn
      the ISO image to a cdrom disc using cdrecord. 

 command: cdrecord -v speed=8 dev=0,0,0 -data datacollection.iso

 (e). It is also possible to mount your ISO file to access directly.  First,
      create a directory under /mnt called 'isoimage' to use for this.

 command: mount datacollection.iso /mnt/isoimage -t iso9660 -o ro,loop

.

Burning Audio cdrom discs

 (a). Using cdrecord, stereo wav files can be burned to audio cd tracks.
      Create a directory to place all your audio files in, perhaps /tmp/audio

 command: cdrecord -v speed=8 dev=0,0,0 driveropts=burnproof -audio -pad -eject /tmp/audio/*.wav

     -You can also control the order either by filename leading character or
      by listing each file individually file1.wav file2.wav file3.wav etc.
     -Avoid using wav files shorter than 4 seconds as the -shorttrack switch
      is necessary.  

 (b). Also, with cdrecord it is possible to record an audio cd with no gaps
      between songs.  This is important for some cd's artistic value, such as
      preserving the way Pink Floyd's The Wall should seamlessly move from
      one track to the next.

 command: cdrecord -v -dao speed=8 dev=0,0,0 driveropts=burnproof -audio -pad -eject /tmp/audio/*.wav

     -dao = Disk-At-Once, not supported by all cdrom writers.  The default is
     -tao = Track-At-Once, which produces a 2sec gap between songs but is
      widely supported by cdrom writers.

 (c). Direct cdrom copying on-the-fly from one drive to another is possible
      using cdrdao.  This is not recommended if both of your IDE cdrom drives
      are attached to the same ide (both on secondary for example) cable.

 command: cdrdao copy --device 0,0,0 --source-device 0,1,0 --source-driver generic-mmc --eject --reload -v 1 -n --datafile /media/tmp/cdrdao.bin

.

Create and Burn an MP3 cdrom for your mp3 player

 (a). You may download your mp3 files or create them yourself by ripping an
      audio cd.  To rip an audio cd you may use LAME, the mp3 audio
      compressor.  The program lame can be used to create mp3 audio files.

 command: lame -q 0 -V 0 --vbr-new -m s -c -p --strictly-enforce-ISO --tt 'song name' song.wav  song.mp3

     -m switch is 'mode', possible modes are s, j, f, d, m. Use 's' for
      typical stereo.  man lame for complete options information. 

 (b). Place the mp3 files into a folder, perhaps /tmp/mp3files and write them
      to a data cdrom.

 command: 

[IV. Rip a data cdrom to an ISO image on your filesystem]

 Taken directly from (disk-archiving notes)

 (a) create an ISO image file from a cdrom disc with dd (be sure the cdrom is
 NOT MOUNTED.  If it is mounted, then umount the device.)

 command: dd if=/dev/cdrom of=cdimage.iso       <- for ide cdrom
          dd if=/dev/scd0 of=cdimage.iso        <- scsi cdrom
          dd if=/dev/dvd of=dvdimage.iso        <- ide dvd