Sonicview SV-360 Premier
SVLan Setup
Menu Load Method
STEP-BY-STEP GUIDE TO UPDATING YOUR SONICVIEW 360Premier/Elite
1. go to files section and download latest bin file for your receiver to your desktop
2. extract the file (unzip) to your desktop
3. ensure you have a dedicated USB stick for loading files, do not have other files on it
4. format the USB stick in FAT format with your computer by going to My Computer and right clicking on the drive and choosing “format” option. Do not choose quick format
5. load the extracted file from your PC to your USB i.e. cut and paste (not drag and drop)
6. remove USB from your PC
7. if your 360 is on, turn if off using the remote, then turn off from the back switch (main power)
8. insert USB in front slot and turn on main power from back
9. hit Menu, choose PVR Options, USB devices, choose Front
10. you will see your file in the list
11. it should be highlighted. hit OK
12. choose S/W update and let the file load
13. DO NOT REMOVE USB as it loads!!!
14. Once loaded you will get a message to Reboot, choose YES
15. DO NOT REMOVE USB as it reboots!!!
16. wait until main screen loads. once rebooted and at main screen you will have to remove the USB. The 360E is equipped with a “safe remove” option, but not the 360P. To remove safely for either, turn the unit off again by using the remote control, then turn off by back switch.
17. remove your USB
18. turn power on again from back
19. once main screen comes, turn to channel 100 and wait for it to autoroll
Force Load Method
How To Force Load Sonicview SV-360 Premier With USB Drive
- Turn the the Premier Off completely from the rear power switch
- Format USB flash drive
- Copy latest bin file fix to the flash drive
- Insert flash drive into premier usb port
- Press and hold Ok button (located on the front panel) and then turn the Premier On using the rear power switch
- Select the bin file and let it load
