Scratchpaper.txt - the intestinal tract of linux notes

From Free Knowledge Base- The DUCK Project: information for everyone
Revision as of 12:55, 26 June 2007 by Admin (Talk | contribs)

Jump to: navigation, search
scratchpaper.txt - the intestinal tract of linux notes     created June 1998
/sbin/ifconfig     pico -w disables word wrap
/sbin/ifup eth0     su -l login as root
      *from telnet CTRL-H backspace, CTRL-D delete
/etc/sysconfig/network-scripts/ifcfg-eth0
ONBOOT YES
/usr/sbin/in.telnetd
/var/log/*
/etc/inetd.conf
talcon=zygotech@itsnet.com
/etc/passwd
/etc/securetty

ftp.linpeople.org/pub/incoming

diff               ls -la .xdefaults
.Xmodmap 22=backspace
  /--> DontZap in section 'ServerFlags' in /etc/X11/XF86Config
 <
  \--> shift-control-alt-backspace                                     /etc/skel
  • Jun 7 12:37:43 host inetd[736]:getpwnam:root:No such user

telnet stream tcp nowait root /usr.sbin/tcpd in.telnetd

modprobe /lib/modules/2.0.32/net/tulip.o
/sbin/ifup eth0


#!/bin/bash      
PATH=/sbin/:/usr/sbin      
      route del -net 192.168.12.0
/etc/sysconfig/network-scripts/dwifup     route add 192.168.12.0 gw 192.168.12.254
/sbin/ifup      
      route add default gw 192.168.12.254 eth0
/proc/net/socket      
/proc/net/dev      
/etc/init.d/network     sysctl: ip forwarding off
       
                 192.168.12.128
   network mask: 255.255.255.0
network address: 192.168.12.0
        gateway: 192.168.12.254

route -v

3c59c.c 3com 905B
192.168.12.253
  • net-tools-1.33-4.src.rpm
  • netcfg-2.19-3.src.rpm
  • netkit-base-0.10-5.src.rpm
/lib/modules/2.0.32/net
/etc/rc.d/rc2.d

warning: unknown PCI device (10b7:9055) please read include/linux/pci.h

/msdos         502             /               hda1    78      LN
/usr           1004            /usr            hda5    1004    LN
/home          1004            /home           hda6    1004    LN
/usr/local     1004            /usr/local      hda7    1004    LN
/sur/src       282             /msdos          hda8    502     dos 16bit >=32
/tmp           133             /usr/src        hda9    282     LN
/              78              /tmp            hda10   133     LN
SWAP           125             SWAP            hda11   125     swap
/tmp/install.log
300hex 10irq cc000 8013
[root@bigdog /root]# cat /etc/sysconfig/network
NETWORKING=yes
FORWARD_IPV4=no
HOSTNAME=bigdog.robotz.com
GATEWAYDEV=eth0
GATEWAY=192.168.12.254
    if [ "${GATEWAY}" != "" ]; then
        if [ "${GATEWAYDEV}" = "" -o "${GATEWAYDEV}" = "${DEVICE}" ]; then
            # set up default gateway
            route add default gw ${GATEWAY} ${DEVICE}
            DEFGW=${GATEWAY}
        fi
    fi  


                                _______________________________________
                               |                                       |
                               | this is really old and inacurate:     |
                               | 1114mb 222x5                          |
                               |                                       |
                               | /usr           300                    |
                               | /home          264                    |
                               | /usr/local     300                    |
                               | /usr/src       200                    |
                               | /tmp            50                    |
                               | /               80                    |
                               | SWAP            32                    |
                               | --------------------                  |
                               |_______________________________________|

I am trapped in telnet: press CNTRL-] to get telnet> prompt

There are three: (port 113), time (port 37), and daytime (port 13).

NTP runs on port 123 using udp

  • ipchains -A input -p udp -j ACCEPT -s 10.0.0.0/8 -d 0.0.0.0/0 123
  • ipchains -A input -p udp -j ACCEPT -s some.trusted.host -d 0.0.0.0/0 123
  • ipchains -A input -p udp -j DENY -s 0.0.0.0/0 -d 0.0.0.0/0 123

More on ipchains

First estable default policies

You may deny all or accept all depending on how paranoid you are.

 :input ACCEPT
 :forward DENY
 :output ACCEPT
 ipchains -A input -s 0/0 -d 0/0 -i lo -j ACCEPT

This annoying tosser doesn't even get to see our web site***

 ipchains -A input -p tcp -s x.x.x.x -d 0/0 80 -y -j REJECT

Below we block access to port 110 pop3 and ssh so we let a few friends in***

 ipchains -A input -p tcp -s x.x.x.x -d 0/0 22 -y -j ACCEPT
 ipchains -A input -p tcp -s x.x.x.x -d 0/0 110 -y -j ACCEPT

Since we were not paranoid we should block ports not being used.

 ipchains -A input -p tcp -s 0/0 -d 0/0 0:19 -y -j REJECT
 ipchains -A input -p tcp -s 0/0 -d 0/0 23:24 -y -j REJECT
 ipchains -A input -p tcp -s 0/0 -d 0/0 26:79 -y -j REJECT
 ipchains -A input -p tcp -s 0/0 -d 0/0 81:1023 -y -j REJECT

You may wish to block udp on all standard ports below 1024

 ipchains -A input -p udp -s 0/0 -d 0/0 0:1023 -j REJECT

Do not reply to ICMP TIMESTAMP packets

 ipchains -A output -j REJECT -i eth0 -p icmp -s x.x.x.x/yy -d 0/0 --icmp-type timestamp-request -l
 ipchains -A output -j REJECT -i eth0 -p icmp -s x.x.x.x/yy -d 0/0 --icmp-type timestamp-reply -l