Changes

1.25 Meter Ham Radio Transceivers

2,022 bytes added, 19:45, 1 February 2019
The following lines were added (+) and removed (-):
Mobile Transceivers and Base Station only.  HT models are not represented here.===Anytone AT 588======Anytone AT-588=== ===AnyTone AT-5888UVIII===[[File:AnytoneAT-5888.jpg]] FM Only.  Tri-Band FM Transceiver. 50 Watts of power output on the VHF band and 40 Watts on the UHF Band and 25 Watts on 220 Band. cross band repeat. Receiving for AM/FM signal of air band, marine band, PMR.  The left side tunes 144 and 220 bands, the right side tunes 144 and 440 bands. Retail: $350===Drake UV-3 Model 1346===[[File:DrakeUV-3.jpg]]FM Only.  Triband.  144 (25W), 220 (10W) and 440 (10W) amateur bands. Frequency selection is via rotary switches on the front panel. There is a speaker built into the left panel of the radio. Model 1346 covered all three bands and included a standard dynamic mic and mobile mounting bracket.Used Value: $400[[File:KenwoodTM-321A-200x86.jpg]]FM, Solid State, the Kenwood TM-321A transmits on 220 MHz with 5 or 25 watts.FM, Solid State, monoband, the Kenwood TM-321A transmits on 220 MHz with 5 or 25 watts. ===Kenwood TM-331A===[[File:KenwoodTM-331A-200x86.jpg]] FM, Solid State, monoband, Kenwood TM-331A is similar to the TM-231A but covers 220 MHz instead of 2 meters. The TM-331A delivers 25, 10 or 5 watts transmitting from 220 to 225 MHz. Receive coverage is 215 to 230 MHz.[[Image:KenwoodTM-621A.jpg]]FM only. Dual band 144/220 MHz FM Transceiver.[[Image:Kenwood-TM-631A-200x86.jpg]]FM only. Dual band 144/220 MHz FM Transceiver. 50 watts out on 2 meters / 25 watts on 220 MHz, Receive is 136-174 and 215-230 MHz.===Kenwood TM-742===[[File:Kenwood_TM_742x200.jpg]]FM only.  TM-742A TRI-Band Amateur Radio Transceiver 2M 220 440.  FM Only. 220-225 MHz (5 KHz steps). Hi: 20 W, Mid: 10 W, Lo: 2 W, Dual conversion superheterodyne, 1978 (Discontinued) Does not have memories, or PL Tones===Yaesu FT-311RM===[[Image:yaesuft311rm.jpg]]FM only. 25 watt mobile. Dual function controls, backlit display, coverage is 220-225 MHz, 10 memories, memory scanning or band scanning.  The tone board is optional: FTS-12 CTCSS (PL) tone encoder/decoder.  Somewhat scarce due to low production numbers.<small><small>keywords: 220 transceivers 222 band </small></small>
Administrator
4,579
edits