The following lines were added (+) and removed (-):
*E1A01 (D) [97.301, 97.305]E1A01 - When using a transceiver that displays the carrier frequency of phone signals, which of the following displayed frequencies represents the highest frequency at which a properly adjusted USB emission will be totally within the band?When using a transceiver that displays the carrier frequency of phone signals, which of the following displayed frequencies represents the highest frequency at which a properly adjusted USB emission will be totally within the band?E1A02 - When using a transceiver that displays the carrier frequency of phone signals, which of the following displayed frequencies represents the lowest frequency at which a properly adjusted LSB emission will be totally within the band?*D. 3 kHz above the lower band edgeE1A03 - With your transceiver displaying the carrier frequency of phone signals, you hear a station calling CQ on 14.349 MHz USB. Is it legal to return the call using upper sideband on the same frequency?*C. No, the sideband will extend beyond the band edgeE1A04 - With your transceiver displaying the carrier frequency of phone signals, you hear a DX station calling CQ on 3.601 MHz LSB. Is it legal to return the call using lower sideband on the same frequency?*C. No, the sideband will extend beyond the edge of the phone band segmentE1A05 - What is the maximum power output permitted on the 60 meter band?*C. 100 watts PEP effective radiated power relative to the gain of a half-wave dipole