The following lines were added (+) and removed (-):
For Conventional frequencies please follow these steps:[[Image:BCD325P2.jpg]]1. Press Menu button2. Highlight Program System, Press E3. Highlight New System, Press E4. Highlight Conventional, Press E5. Confirm by pressing E6. Highlight Edit Group, Press E7. Highlight New Group, Press E8. Highlight Edit Channel, Press E9. Highlight New Channel, Press E10. Enter your Frequency, Press E11. To enter more frequencies, Highlight New Channel, Press EDynamically Allocated Channel Memory – organized into ‘Systems’, ‘Sites’, (within trunkingsystems), ‘Groups’ (within systems), and channels (within groups). Up to 500 systems, 1,000 totalsites (max 256 per system), 20 groups per system, and 25,000 channels (500 max IDs or 1,000frequencies per system).==basic usage==* Press the knob at the top (E) to select Volume control function before turning to set volume.* Press Func then press the top (E) knob to display the squelch level and set it.==field programming==When you see [ Press E ] it means to press down on the top turn dial.For Conventional frequencies please follow these steps:# Press Menu button# Highlight Program System, Press E# Highlight New System, Press E# Highlight Conventional, Press E# Confirm by pressing E# Highlight Edit Group, Press E# Highlight New Group, Press E# Highlight Edit Channel, Press E# Highlight New Channel, Press E# Enter your Frequency, Press E# To enter more frequencies, Highlight New Channel, Press E1. Press Menu# Press Menu2. Highlight Program System, Press E# Highlight Program System, Press E3. Highlight New System, Press E# Highlight New System, Press E4. Highlight the system you need Conventional, P25, Motorolla, Edacs, LTR, Press E# Highlight the system you need Conventional, P25, Motorolla, Edacs, LTR, Press E5. If P25 (Standard Trunk), EDACS, or Motorolla please follow the steps below:# If P25 (Standard Trunk), EDACS, or Motorolla please follow the steps below:6. Highlight Edit Site, Press E# Highlight Edit Site, Press E7. Highlight New Site, Press E# Highlight New Site, Press E8. Highlight Set Frequencies, Press E# Highlight Set Frequencies, Press E9. Highlight New Frequency, Press E# Highlight New Frequency, Press E10. Type in Primary and Alternate Frequencies (red and blue frequencies on RadioReference) Press E# Type in Primary and Alternate Frequencies (red and blue frequencies on RadioReference) Press E11. Highlight New Frequency to enter more, Press E# Highlight New Frequency to enter more, Press E12. Press Menu 4 times.* 12. Press Menu 4 times.13. Highlight Edit Group, Press E* 13. Highlight Edit Group, Press E14. Highlight New Group, Press E* 14. Highlight New Group, Press E15. Highlight Edit Channel, Press E* 15. Highlight Edit Channel, Press E16. Highlight New Channel, Press E* 16. Highlight New Channel, Press E17. Enter in the DEC/TGID, Press E* 17. Enter in the DEC/TGID, Press E18. To enter more DEC/TGID Highlight New Channel, Press E* 18. To enter more DEC/TGID Highlight New Channel, Press E19. Press Menu 4 Times* 19. Press Menu 4 Times20. Highlight Edit Sys Option, Press E* 20. Highlight Edit Sys Option, Press E21. Highlight ID Scan/Search, Press E* 21. Highlight ID Scan/Search, Press E22. Press E on ID Scan if using TGID's and ID Search if just using only Frequencies.* 22. Press E on ID Scan if using TGID's and ID Search if just using only Frequencies.# Press Menu# Highlight Program System, Press E# Highlight New System, Press E# Highlight P25, Press E# Highlight One Freq Trunk, Press E# Highlight Edit Site, Press E# Highlight New Site, Press E# Highlight Set Frequencies, Press E# Highlight New Frequency, Press E# Enter the Frequency, Press E# Highlight New Frequency, Press E# Once you have all the Frequencies entered you can Press ScanYou have to create systems first, create sites in the trunking systems (where the trunkingfrequencies now go), create groups in the systems, create channels in the groups, then programthe frequencies or IDs into the channels. Or, you can Quick store freqs or Quick store IDs (onlyafter you program the trunking system and site). Trunking IDs only go into trunking system groupsand conventional frequencies only go into conventional system groups. You can only store onetrunking system per ‘system’. You can store up to 500 systems, up to 20 groups per system, andup to 1000 frequencies or 500 IDs per group. Total channels are limited to about 25,000. Also,remember that conventional frequencies and IDs are considered channels.<small><small><small>Searh Terms: bearcat bear cat Uniden Scanner BCD325P2 APCO P25 Police Fire</small></small></small>1. Press Menu== related ==2. Highlight Program System, Press E* [[Uniden BCD996P2 TrunkTracker V Scanner]]3. Highlight New System, Press E* [[Uniden BCD325P2 TrunkTracker V Scanner]]4. Highlight P25, Press E* [[APCO-25]]5. Highlight One Freq Trunk, Press E6. Highlight Edit Site, Press E7. Highlight New Site, Press E8. Highlight Set Frequencies, Press E9. Highlight New Frequency, Press E10. Enter the Frequency, Press E11. Highlight New Frequency, Press E12. Once you have all the Frequencies entered you can Press Scan