Talk:Sonicview SV-4000 FTA Receiver

• For KEYRIPPER Key00 is key86 (Lines 10 & 11) and key01 is key96 (Lines 20 & 21)

1) Press MENU, <SYSTEM SETTINGS> <USER OPTIONS> and turn Autoroll to "OFF"

2) Press EXIT

3) Press right arrow to <ENTERTAINMENT> and press 7890

4) A CODE option will appear, press OK

5) Press the right arrow until you get to CAS < NagraVision >

6) Press the down arrow to the sat line. Press right arrow until you get to your desired sat

DISH < 01 01 00 >

7) key00 is active, highlight line number "10" then press the right arrow and start entering the keys (first 8 sets of digits) example: 1C 3A 29 13 61 5E C6 21

Now highlight line number "11" then press the right arrow and start entering the keys (second 8 sets of digits) example: C3 41 2A 31 5C 2B CD A1

8) If key01 was active, you would highlight line number "20" then press the right arrow and start entering the keys (first 8 sets of digits) example: 21 A4 C4 23 40 AC 1B 3A

Now highlight line number "21" then press the right arrow and start entering the keys (second 8 sets of digits) example: 11 C2 41 A1 6D 2D 33 22

9) Press EXIT - Click "OK" on "YES" to save the changes

NOTE: The example keys are just that, examples

The active key is key00,

Edit (Line 10) 1C 3A 29 13 61 5E C6 21 (Line 11) C3 41 2A 31 5C 2B CD A1

If the active key was key01,

We would have edited (Line 20) 21 A4 C4 23 40 AC 1B 3A (Line 21) 11 C2 41 A1 6D 2D 33 22

• ! YOU MUST BE A PAID SUBSCRIBER. NEVER PROGRAM FOR CHANNELS YOU ARE NOT PAYING FOR! IT IS ILLEGAL TO PIRATE SATELLITE TELEVISION!

Settings:

LNB power          ON
LNB type           OCS-DP
LNB frequency      11250
Transponder        110=12224, 119=12239
22khz              OFF
Search option      All
Network search     ON
Diseqc             110=2, 119=1
Motor              Disable
Legacy switch      OFF

You have to set your antenna seting correctly for your dishpro twin OCS DP, diesq port 1 119, diesq port 2 110. Do not do blind scan on circular sats auto scan only.

The first time setup only you will need to: Go into your Menu, then to System Settings. Now scroll down to User Options. Click on that and then turn on Channel Number by SID and Sort by SID. My first attempt put a “2” in front of every channel eg. 2400, not 400. Then Press the “SAT” button on your remote and then select the satellite provider name, this sinks up channel numbers. This was the easy fix for the channel # correction and only have to do the "SAT" button fix from now on after every update.

EPG = channel guide listing downloaded. For best results to populate EPG. Try putting channel on 200 or 195 and let it sit for about 5 minutes and it should populate about 3 days. But it is impossible to get more then that. Because some providers do not do 7 day EPG.