Please note, part of this page is missing. However, operation is the same as TYT TH-9000D 1.25M Transceiver
200 Alphanumeric Channels, Full Keypad Microphone. Cool-Blue Display Backlight. Includes mounting bracket & fused power Cable. Features 3 Selectable Power levels, DTMF, Keypad lock, Scan modes & more
front panel controls:
short press long press ------------------------------ ------------------------------ [F ] select memory channel for save [P1] clone [P2] open squelch "monitor" display operating voltage toggle [x ] power [P3] VFO/memory scan [P4] tune step offset -,+,none, and freq [P5] tone squelch (disable, tone, tsql, dcs) chan memory ?
hand mic:
- adjust transmit power: press [FUNC] then [0] to toggle though three transmit power levels.
basic usage
VFO
Short press P3 to switch between VFO and Memory channel.
On the mic you can press the VFO button on the upper right.
CTCSS
Short press P5 to cycle though various tone, tone squelch, etc...
repeater offset
To turn on or off repeater offset push and hold P4
- push and hold down once - offset frequency. typically this is 1.600 for 1.25 repeaters
- push and hold down again - changes + or - offset shift
program channel
Select a VFO frequency
and