The following lines were added (+) and removed (-):
When turned on, scanner goes immediately to scan. * To stop scanning, press the MANUAL button (3rd row 1st button)* To go directly to a channel press the letter of the bank (bottom row A - E) and type the desired channel number (a number between 1 and 20). Begin single digit channels with preceding zero.* You can step forward though channels by pressing the MANUAL button.When turned on, scanner goes immediately to scan. Press the MANUAL button to stop scanning.* Press MANUAL* Navigate to the memory bank and channel number to be programmed* Enter the frequency and select AM/FM or verify* Press the ENT button (4th row last button) to commit frequency to that memory bank channel===Connect headphone or ext speaker===Connection on top is for a sub-mini 2.5mm 3/32" TS phono plug. The jack is labeled simply "EAR." An adapter to go from the tiny 3/32" plug to a more modern 1/8" or 1.4" plug will make this useful. See a discussion on phono plug sizes here: [[TRS_Phono_Plug#Sizes|Phono Plug Sizes]]. This scanner uses a mono TS plug.