The following lines were added (+) and removed (-):
#'''Connect the USB cable to the X1C5 and your PC.''' The device need not be powered on, it will be detected on Windows and Linux (current kernels) #On the Windows VirtualBox image choose SETTINGS -> SERIAL PORTS -> Port 1 and... #Check box labeled "Enable Serial Port" and Port Number use COM1 (''or whatever you desire'')#Path/Address set to: /dev/USB0 (''or USB1 if you have more than one virtual USB device although it is recommended to disconnect all others'')#Click OK and start the Windows Session (Normal Start)#'''Windows launch the AAPRS 51Series Setup.exe'''