The following lines were added (+) and removed (-):
you can test by connecting with minicom (minicom -s) option (A) and set the serial port to you can test by connecting with minicom (minicom -s) option (A) and set the serial port and (E) Bps Bps/Par/Bits : 9600 8N1Hardware flow control to yes and software flow control to no. What you do from there... you're on your own. No Linux support.What you do from there... you're on your own. No Linux support. If you turn the X1C5 on then you should see the following come up in minicom: AT+DMOSETGROUP=1,144.0000,144.0000,0,3,0,0 It is communicating to the PC.