The following lines were added (+) and removed (-):
A note on motion detection recording: Unlike Pico2000, if there is further motion detected during the recording interval, the software will continue to record. Once triggered, recording will continue for the duration set or longer if motion persists. solution in progress...It is likely an issue of frame crossover, also sometimes present using the Pico software with this card. To get rid from the frames crossover increase value in the "Drop the first" edit box in the "Device" tab in the "Camera Settings" window. The default setting was [5] and adjusting it to [6] seems to resolve the flickering problem.# CNTRL-ALT-I# Device Tab# In "Video Device" frame, right under "Video Source" drop-down is a textbox with the numer 5, arrows, and label "Drop the first X frames when switching between sources." and increase value to 6 or more.=== Troubleshooting: poor quality image capture ===Make sure your system is set to display 24-bit or 32-bit color. 16-bit color is acceptable, although images won't show their true 24-bit color depth. 16-color (4-bit) and 256-color (8-bit) modes are unacceptable for image viewing and are not recommended.