The following lines were added (+) and removed (-):
== Technical Support ===== Firmware Update ===The firmware in these radios cannot be updated. The microcontroller is an OTP type. (One Time Programmable) Once 'flash' programmed at the factory, it cannot be changed. === Birdies ===These radios use a 26MHz reference oscillator. These have been known to cause interference on the following frequencies which are multiples of 26. -> 156.0, 234.0, 416.0, 442.0, 468.0, 494.0 MHz.=== Can only program empty channels ===This is correct. If you wish to change the channel program you must first delete, then reenter, unless you are using PC software.Manual programming of memory channels can Only be done while display A (top display) is selected. == External Resources ==* [http://www.miklor.com/F8HP/ Miklor Programming: Baofeng BF-F8HP]