The following lines were added (+) and removed (-):
In this example will enter a 70cm repeater with PL and +5Mhz offset.offset + or -# Enter the VFO Mode# Set offset [MENU] and arrow to item 21 (SFTP)# Press [AB/ENTER] use arrow to select + and press [AB/ENTER] and [MENU], [MENU] to saveoffset amount# Press [MENU] and arrow to item 22 (OFFSET) - Press [AB/ENTER] then enter the offset- Press [AB/ENTER] and [MENU], [MENU] to saveEnter 'TCODE' (CTCSS / DCS)- Press [MENU] , then (channel knob) to Menu 12 (TCODE)- Press then [MENU] to select CTCSS / DCS / OFF- Press (channel knob) to select desired code.- Press to save.- Press [MENU] or any key to exit.#Enter Frequency - Using the keypad, enter he desired frequency.- Press & Hold the [VM/SCAN] button to display channels 01-99- Press (channel knob) to select the desired channel. NOTE: If channel number is blinking, that channel has been previously programmed and will be overridden. - Press to save.Enter the MR Mode- Press [VM/SCAN] to enter MR (channel mode).