The following lines were added (+) and removed (-):
#STEP - frequency step in VFO#STEP - frequency step in VFO (5, 6.25, 10, 12.5, 20, 25 kHz)#SAVE - #SAVE - battery saver reduces xmit power when strong signal detected#ROGE - roger beep#ROGE - roger beep should be off for ham repeater use#TOT - #TOT - transmission timeout#BEEP - #BEEP - keypress beep#TDR - #TDR - Enable dual watch#R-CODE - #R-CODE - sets tone squelch frequency, offers no way to disable!#T-CODE - #T-CODE - sets transmit PL tone frequency, offers no way to disable!#ABR - #ABR - LCD brightness#PTTID - #PTTID - transmit signal ID code#ANI - #ANI - automatic number ID of radio#PTIDM - #PTIDM - signal code mode#DT-ST - #DT-ST - audible DTMF tone #MDF 1 - #MDF 1 - top displays frequency, channel, or name#MDF 2 - #MDF 2 - bottom displays frequency, channel, or name#BCL - #BCL - busy channel transmit lockout#SFTD - #SFTD - repeater shift + or -#OFFSET - #OFFSET - repeater offset#SCRNM - #SCRNM - scanning resumes based on timer, carrier, halts on signal#REV - #REV - reverse frequency#STE - #STE - eliminate squelch tail#NAME - #NAME - channel name#W/N - #W/N - wide or narrow band, 5 KHz or 2.5 KHz