The following lines were added (+) and removed (-):
Criticisms of the documentation are warranted. You will find yourself conducting some trial and error on things that could have been eliminated by proper documentation. Some of these shortcomings will be documented here as time permits.== Assembly and Installation Tips ==Since the instruction manual covers assembly and installation the process will not be repeated here as the manual is available free online from DXEngineering (recommended) and from the manufacturer web site (same except larger document in many languages.) What will be covered here are some tips and suggestions that will be helpful where the documentation fails to provide adequate information as well as some tips based on experience with the antenna system.Issue #1: Documentation at the time of this writing does not describe proper wiring with regards to polarity for the motor controller wiring from the antenna to the station control unit. Wiring backwards will result in an error on the controller unit.Issue #2: Initial movement and bolt/screw torque. You may have to loosen bolts at movement points or where it is hinged. You may also have to physically by hand slightly nudge the