The following lines were added (+) and removed (-):
== Firmware Update Procedure ===== CaptiveWorks 600S Premium ===Prepare reciever:<BR>Turn off and attach the null-modem cable between the receiver and the computer serial port.Then plug in the power plug.<BR>With the CaptiveWorks Premium receiver off, press the front power button and hold it.<BR>While holding it, turn the rear toggle switch on, while STILL holding front power button.<BR>You will see "boot" on the front display.<BR>At this point, remove your finger from the front power button now your ready to load in some files.<BR>:1. Get the current 1.06 loader:2. Download the latest bin:3. Load the latest bin with the current loader as per these instructions:Open 1.06 loader, select the latest bin in the "File" bar across the top.<BR>For Options, select Download S/W.<BR>For Select a port, choose your COM port (usually 1).Then hit the start/load &wait for the receiver to display "-end".<BR>At this point, turn reciever off at rear switch.<BR>activate patch on remote hit f1-0-0-0 key patch enabled<BR>