The following lines were added (+) and removed (-):
1. The Hardware: The hardware is the LAN adapter for the receiver and it is IDENTICAL for the adapters sold as iHub, NewLink or the current SVLAN. You MUST have one of these adapter to enable your receiver to connect to a server.being revised2. The Software: The software that runs on the LAN Adapter, the FIRMWARE, is what actually makes the LAN adapter act as an iHub, NewLink or SVLAN.=== sv lan setup troubleshooting ===Instructions:Q: Where is the IP Config (IPCONFIG) setting option in setup menu?# LAN Adapter (whatever firmware, iHub/Newlink/SVLAN). If you buy an adapter, it is sold under the name SVLAN because it's already at SVLAN firmware level, so you can skip Step 2 below.A: Hit menu then ok on installation and it is the last one in the list under Version information# Update LAN adapter firmware to latest SVLAN Level v4.8 # Purchase either::# SVLAN a Serial Number via internet seller to enable access Akai Public Server -or-:# b) Access to a 3rd Party Public Server# Enter SN and/or other provided information into your receiver IPCONFIG section.== Files and Updates ==* <del>[http://www.ftaforall.biz/forums/forumdisplay.php?f=114 FTAFORALL.net Files Section, FTA Receivers]</del>:* <del>[http://www.ftaforall.biz/forums/forumdisplay.php?f=427 WizHub and Lan - Akai Japan Group]</del>* <del>[http://www.myfreeneeds.com/forums/f813/#axzz1PkuFDyji MyFreeNeeds, Sub-Forums: SVLan/WizHub Files]</del>: [http://www.ftaforall.us/forums/index.php FREE FOR ALL - The Free-for-All Community]:* [http://www.ftaforall.us/forums/showthread.php?t=103805 SV Lan Name Change to WizHub! (short for Wiznet Hub)]:* [http://www.ftaforall.us/forums/forumdisplay.php?f=427 WizHub/ Lan files][[Category:FTA]]