The following lines were added (+) and removed (-):
*Exit Gimp. *Copy either arrow.scm or arrow_V3.scm into /usr/share/gimp/2.0/scriptsThe scm file you use depends on your version of Gimp. The arrow_V3.scm should check that you are running V2.99.14 or later. If you are using GIMP V2.10.x you need to use file arrow.scm.If you get this error: '''FAILS ON GIMP VERSION 2.10.30''' - you are using the wrong version of the script, delete that .scm and try the other. To use the arrow script you have to "create paths." If you are not familiar with creating paths start by making sure you select the "Paths Tool" which is different from the Paintbrush tool.# click on the Paths Tool# make sure the Paths Tool is set to "Design" for the paths edit mode# on canvas using Paths Tool you will have to make 3 total clicks! First is where the head of the arrow will appear. Second and Third define the tail direction. For the second and third click if you do them in the same spot then you will have a straight arrow.# On Gimp menu click Tools -> Arrow -> Arrow* The arrow head will appear on the first click point you made in your path!