The following lines were added (+) and removed (-):
==Amplifier Connection====Non-Icom Amplifier Connection==The ALC input level must be in the range 0 V to – 4 V. The transceiver does not accept positive volt-age.The ALC input level must be in the range 0 V to – 4 V. The transceiver does not accept positive volt-age. SEND RELAY type menu item (in the ACC set mode menu) which allows selection of the OMR-109F relay (LEAD) or a MOSFET interface (MOS-FET). The MOSFET option is rated at 250V/0.2A AC/DC, non-inductive. If the amplifier's open-circuit keying-line voltage is above 16V but below 250V, this option can be selected. With the Firmware Update Version 2.00 “MOS-FET” is now the default value of “SEND Relay Type.”