The following lines were added (+) and removed (-):
===PLL Unlock===From a Kenwood TS-940S Service Bulletin 10/18/1985 - Some users of the TS-940S have reported a blanking of the display accompanied by a loss of transmit and receive. Readjustment of the PLL unit will correct this tendency. Procedure:On the PLL Unit #Set the dial frequency for approximately 1.8Mhz (inside the band).#Using an RF probe at TP #5 adjust L22, L23 and L24 for a maximum reading on the meter. You should see approximately 250mV.#Adjustment of L24 will produce the greatest change, which may be up to 90 degrees from its present position.[[File:Kenwood-TS940S_ASB0900.JPG|thumb|none|100px]]