The following lines were added (+) and removed (-):
There are four lettered hand microphone buttons:===There are four lettered hand microphone buttons===Menu of 50 items:===Menu of 50 items======Power on/off===Once power is connected, press the button to turnthe transceiver on. Three ascending tones will sound,indicating that the transceiver has correctly poweredon. Hold the key for 2 seconds to turn thetransceiver off.===Turn Volume===Press “VOL+” to raise the volume. Press “VOL-” tolower the volume. Hold the key to go fast. The volumeis adjusted in 15 steps from 0 (lowest) to 15 (highest).The default setting is 4.===Select Channel===You can select an operating channel in one of severalways:#Use the programming software to store operating channels ahead of time. You can then access them directly in MR mode, using the channel up/down buttons or the numeric keypad on the microphone.#Input frequency values by using the numeric keypad in VFO mode.#Press the “CHA+” or “CHA-” key to select the frequency in VFO mode. Hold the key to go fast