The following lines were added (+) and removed (-):
To set the beep:To set the beep: This option will determine whether or not a beep is heard after each button press. Press the Menu button twice and the display will either show "b" or "-". You have 7 seconds to change the option. Press the Channel/Volume Up or Down button to turn the beep on "b" or off "-". Press the Enter/Lock button when done.To transmit:To transmit: To transmit, press and hold the TALK button and speak into the built-in microphone (or the external microphone, if connected). When the TALK button is pressed, the Transmit indicator will light and the speaker will be muted. When theTALK button is released, the listener will hear a beep to confirm you are done speaking.To monitor:To monitor: Equivalent to "squelch" function. This function will unmute the speaker/disable Auto Squelch as long as it is pressed. This is useful to hear signals that are too weak to be recognized or to adjust the volume to background noise. Tomonitor, simply press and hold the MONITOR button.To send a Call Tone:To send a Call Tone: This function will send a distinctive tone to users who are tuned to the same channel as your unit. The users you are trying to reach will recognize your distinctive call tone. To send a call tone, simply press the CALL button once. Listening to transmissions: When the unit is on, it will automatically broadcast the incoming signal when a strong incoming signal is received on the selected channel. To lock control keys: This function will lock the Channel/Volume Up Down and Menu buttons. To activate, press and hold the Enter/Lock button for 2 seconds; the unit will beep and "L" will be displayed briefly. To deactivate lock press and hold the Enter/Lock button for 2 seconds and the unit will beep with "-" briefly displayed. Auto Squelch: This unit is equipped with Auto Squelch, which will automatically mute weak transmissions and unwanted noise. Auto Squelch can be temporarily turned off using the MONITOR button (see TO MONITOR section) Voice Activation VOX: Voice activation will allow you to listen/transmit while freeing your hands for other tasks. Press the AUTO button; the Power/VOX indicator will light red. Then whenever the unit detects a sound or voice, it will automaticallytransmit. To shut this function off, press the AUTO button again; the Power/VOX indicator will light green.