Changes

Part 97 : Sec. 97.119 Station identification

2,116 bytes added, 04:32, 25 September 2017
The following lines were added (+) and removed (-):
Q: Do I have to say my call sign at the end of each transmission?'''Q: Do I have to say my call sign at the end of each transmission?'''Q: Do I have to say my call sign every ten minutes on a repeater I am monitoring?'''Q: Do I have to say my call sign every ten minutes on a repeater I am monitoring?'''Q: I was talking and was pulled away from my radio due to circumstances, am I in trouble because I didn't give my call sign at the end of my last transmission?If all you've done is key up the repeater and announce your call sign and indicate that you're monitoring, you've satisfied both the requirement to ID every ten minutes and ID at the end of your communication if specifically no one responds to you so that the sum of your communication was simply you announcing your presence on the repeater. '''Q: I was talking and was pulled away from my radio due to circumstances, am I in trouble because I didn't give my call sign at the end of my last transmission?''''''Q: How worried should I be about concluding a communication with my call sign?'''A: Not extremely worried. People don't always get to know when their last transmission will be their final transmission in a communication.  Life is very dynamic and so is radio.  Conditions might change.  You might not be able to make further contact with another station.  You might be on a repeater and another ham moves in and talks over you.  You just don't always get to know when your last chance to talk will be.  You could ID at the end of each transmission to play it extra safe, and some hams do this.  It's just not necessary.  It's your intent that will be the deciding factor when such an oversight is observed.  When conveying 73 and good bye then be sure to include your call sign.  If you're going to stick around and monitor, then don't worry about it.  A communication is somewhat ambiguously defined in legal terms and a ham might consider occasional statements made throughout the afternoon all part of the same communication.  It is only definitive when you clearly state that you're departing and one common method is to state, "This is A0NEW and I will be clear on your final."  This method is not only FCC compliant, but clear and polite.'''Q: Do I have to clear my station?'''A: No.  You have to give your call sign when concluding with your final transmission when it is known to you that the transmission will be the final transmission in a communication, as explained already.  You do not have to announce that your station is "clear."  You can be curt about it and just say your call sign and nothing more, forever!  It isn't necessarily friendly however it is not a violation either.  Just make sure you ID when you're supposed to.
Administrator
4,579
edits