The following lines were added (+) and removed (-):
== Linux ==The Peaqe / Pico software is for Microsoft Windows only. However, these cards will work under linux, with different software.To configure on linux:in '''''/etc/modprobe.conf''''' For one card: <pre> options bttv card=77 tuner=4 radio=0 triton1=0 vsfx=0 autoload=0 </pre> For two cards: <pre> options bttv card=77,77 tuner=4,4 radio=0,0 triton1=0 vsfx=0 autoload=0 </pre> And so on... Also, if during bootup your system hangs for 5 minutes or more at "Setting clock (utc)": add this '''''before''''' ''options bttv'' <pre> options i2c-algo-bit bit_test=1 </pre>