The following lines were added (+) and removed (-):
1. Select a channel to program by pressing MANUAL, entering the channel1. Select a channel to program by pressing MANUAL, entering the channel number you want to program, and pressing MANUAL. number you want to program, and pressing MANUAL. To enter the decimal, press ./CLEAR. The decimal point is displayed: To enter the decimal, press ./CLEAR. The decimal point is displayed as a dash (-) on the display. as a dash (-) on the display. If you made a mistake in Step 2, E appears on the display. Press: If you made a mistake in Step 2, E appears on the display. Press ./CLEAR twice and repeat Step 2. ./CLEAR twice and repeat Step 2.4. To confirm the proper entry, press REVIEW. The programmed frequency4. To confirm the proper entry, press REVIEW. The programmed frequency appears on the display, one digit at a time. appears on the display, one digit at a time.5. To program more channels, repeat Steps 1 to 3. If you want to program5. To program more channels, repeat Steps 1 to 3. If you want to program the next channel in sequence, simply press MANUAL and repeat Steps 2-4. the next channel in sequence, simply press MANUAL and repeat Steps 2-4.