1,217 bytes added,
6 February deal for use as a first stage regulator on any domestic size ASME or
DOT container in propane gas installations requiring up to 1,500,000
BTU’s per hour. The regulator is factory set to reduce container
pressure to an intermediate pressure of approximately 10 PSIG.
Features
* Compact design can be connected to a service valve using either
a POL adapter or a RegO product pigtail.
* Large threaded ⅜” F.NPT bonnet vent can easily be piped-away
underground installations without the need of glue kits or extra
adapters.
* Non Adjustable
* Large flow orifice resists freeze ups due to water concentration in
LPG vapor.
* Design provides for good flow regulation at both high and low
container pressures.
* Built in relief valve and travel stop comply with NFPA 58 over
pressure requirements.
* Incorporates ⅛” F.NPT downstream pressure tap for an easy
inline check of the regulator’s delivery pressure.
* Molded diaphragm provides an o-ring type seal between the
body and bonnet.
* Body and bonnet are assembled in the USA using the unique,
patented RegUlok seal system.
* Fully painted in brilliant red for complete corrosion protection.
* Mounting bracket available as an accessory: part number 2302-31.