The following lines were added (+) and removed (-):
== Manual Key Entry ==* For KEYRIPPER Key00 is key86 (Lines 10 & 11) and key01 is key96 (Lines 20 & 21)1) Press MENU, <SYSTEM SETTINGS> <USER OPTIONS> and turn Autoroll to "OFF"2) Press EXIT3) Press right arrow to <ENTERTAINMENT> and press 78904) A CODE option will appear, press OK5) Press the right arrow until you get to CAS < NagraVision >6) Press the down arrow to the sat line. Press right arrow until you get to your desired satDISH < 01 01 00 >7) key00 is active, highlight line number "10" then press the right arrow and start entering the keys (first 8 sets of digits)example: 1C 3A 29 13 61 5E C6 21Now highlight line number "11" then press the right arrow and start entering the keys (second 8 sets of digits)example: C3 41 2A 31 5C 2B CD A18) If key01 was active, you would highlight line number "20" then press the right arrow and start entering the keys (first 8 sets of digits)example: 21 A4 C4 23 40 AC 1B 3ANow highlight line number "21" then press the right arrow and start entering the keys (second 8 sets of digits)example: 11 C2 41 A1 6D 2D 33 229) Press EXIT - Click "OK" on "YES" to save the changesNOTE: The example keys are just that, examplesThe active key is key00,Edit (Line 10) 1C 3A 29 13 61 5E C6 21(Line 11) C3 41 2A 31 5C 2B CD A1If the active key was key01,We would have edited (Line 20) 21 A4 C4 23 40 AC 1B 3A(Line 21) 11 C2 41 A1 6D 2D 33 22== Dish Network Settings ==*! YOU MUST BE A PAID SUBSCRIBER. NEVER PROGRAM FOR CHANNELS YOU ARE NOT PAYING FOR! IT IS ILLEGAL TO PIRATE SATELLITE TELEVISION!Settings: LNB power ON LNB type OCS-DP LNB frequency 11250 Transponder 110=12224, 119=12239 22khz OFF Search option All Network search ON Diseqc 110=2, 119=1 Motor Disable Legacy switch OFFYou have to set your antenna seting correctly for your dishpro twin OCS DP, diesq port 1 119, diesq port 2 110. Do not do blind scan on circular sats auto scan only.The first time setup only you will need to: Go into your Menu, then to System Settings. Now scroll down to User Options. Click on that and then turn on Channel Number by SID and Sort by SID. My first attempt put a “2” in front of every channel eg. 2400, not 400. Then Press the “SAT” button on your remote and then select the satellite provider name, this sinks up channel numbers. This was the easy fix for the channel # correction and only have to do the "SAT" button fix from now on after every update.EPG = channel guide listing downloaded. For best results to populate EPG. Try putting channel on 200 or 195 and let it sit for about 5 minutes and it should populate about 3 days. But it is impossible to get more then that. Because some providers do not do 7 day EPG.[[Category:Tangible Product]]