The following lines were added (+) and removed (-):
*Lube throttle and clutch cables (WD 40 , not grease)*Check and adjust shock/fork settings (compression and dampening)*Add an in-line fuel filterGrease steering head bearing and tightenGrease swing arm pivot bolt with anti-seize lubeGrease front and rear axles with anti-seize lube. Do not grease thethreadsCheck Valve Lash (.003 intake and .004 exh)Check tire pressureCheck chain slack. 1” - 1.5” slack at middle of swingarmLevel carb - side to sideIf gas overflows, set the float level. Stock float levels are alsoknown to be out ofadjustment sometimesAdd rim locks if possible. At least on the rear rimCheck gas tank for debris , dust or flash and remove