The following lines were added (+) and removed (-):
The USB A connector is used on devices which provide power (mostly computers).The USB A connector is used on devices which provide power (mostly computers). These devices are known as the host. The host, typically a computer, will supply power as well as optional data transfer capabilities (the computer always will.) Standard-B plug or USB B connector is used on devices which receive power like most peripherals such as modern printers or bed scanners. These devices are known as peripherals and have only slave functionality. They charge or are powered by the voltage they receive from a host device, along with having optional data transfer capabilities.Standard-B plug or USB B connector is used on devices which receive power like most peripherals such as modern printers or bed scanners.Mini USB connectors are smaller than their standard USB counterparts and feature a fifth pin. The fifth pin is known as the ID pin and is typically of no use in mini USB connectors. This connector type is rare and has been officially withdrawn from the standard. Type 'A' devices are considered to supply power. Small devices are not used to supply power, they tend to require power, such as a cell phone requires power to charge. Those that require power then fall into the type 'B' category.For devices where the Standard-B connector would be too large. Some cell phones, such as the Motorola RAZR V3, or smaller devices, such as the Neat Receipts portable sheet scanner, and even gaming devices, such as Sony Play Station 3 controllers, all use the USB Mini B Standard.A need for yet a thinner, smaller connector type was perceived and USB Micro was introduced to surpass the mini USB standard. Although the micro USB connector is much thinner than the mini, it has been especially designed for rough use and the connector will hold up under more connects and disconnects. Standard devices will use Micro-B receptacles, while USB OTG (On-The-Go) devices will use Micro-AB receptacles.In the portable device world it became necessary to accommodate a new circumstance where a portable device may act as a host device as well as a slave device. A mobile device such as a tablet or smart phone may be connected directly to a printer. This makes the mobile device, which has historically been a slave device, assume the role of a host device, supplying power to the peripheral such as a printer. USB On-The-Go is an extension to the USB specification allowing a micro USB to serve as A or B type, thus USB On-The-Go is Micro-AB. This supplement provides means for easy switching between the master and slave role of a device. There is a push in some countries to mandate that Micro-AB become the standard for all mobile devices such as smartphones.Micro-AB receptacles will accept both Micro-A and Micro-B plugs.The Micro USB standard has gained popularity and is predominate on all modern mobile devices. Almost all cell phones use this connector type for the charger and data transfer connection.Micro-B receptacles will accept only Micro-B plugs.