The following lines were added (+) and removed (-):
== mods ==You need an RP-sma to BNC female adaptor to connect to coax cable or a better antenna. == improvements or modifications =====audio processing / compression===Using computer software audio processing such as [https://www.thimeo.com/stereo-tool/download/ Thimeo Stereo Tool 10.10].Using a hardware audio processing device between the audio source and the transmitter.===antenna===Use the long wire antenna for best range. Try to run it as straight as possible, either vertically or horizontally although vertical polarization is probably best. If you run the unit on full power you will definitely want to use the wire antenna as the short telescoping antenna does not radiate well enough to protect the transmitter from reflected power which could cause damage.The wire antenna is 133½" long (the wire part) and including the screw base would be almost 134".* 133½" = 11' 1½" ''which appears to be a 1/2 wave'' for an end fed (long wire) antenna.* You can access the higher power by holding both the <big>'''CYCLE button and MUTE simultaneously'''</big> while the unit is operating (has power).* Try switching to EU and see if it benefits. ???[[Category:Electronics]][[Category:Radio]][[Category:Consumer Electronics]][[Category:Tangible Product]][[Category:Micro Broadcasting]]