The following lines were added (+) and removed (-):
If your packet error rate is high (over 10%), you are probably experiencing interference. A signal strength indicator may report the signal as "good" with interference. Signal quality may even acceptable, since interference may be intermittent. It is possible for interference to be so bad that you don't see high packet error rates because you don't even recognize incoming packets - this can be verified by comparing the number of packets sent by the AP to the number of packets received by wireless client.*1(B) or 6(G) Mbps Provides the greatest range but the lowest throughput.*11(B) or 54(G) Mbps Provides the greatest throughput but the lowest range.[[Category:Radio]]