The following lines were added (+) and removed (-):
===erase memory channel======memory channels===#Press MCK/W*'''78 general purpose memory channels'''#select channel to delete with MEM/VFO CH knob*20 "Smart Search" memory channels (FM only)#Press REV*10 full duplex satellite memory channels#Press MCK/W*4 home memory channels*1 quick memory bank channel*24 band stacking registers===erase memory channel===#Press MCK/W#select channel to delete with MEM/VFO CH knob#Press REV#Press MCK/W#press ENT and enter the lower frequency limit followed by ENT#Press MCK/W#Turn the MEM/VFO CH dial until "L" is displayed for channel#Long Press MCK/W#press ENT and enter the upper frequency limit followed by ENT#Press MCK/W#Turn the MEM/VFO CH dial until "U" is displayed for channel#Long Press MCK/W#Press the PMS button and "LU" will be displayed for channel#Press SCANTo exit the scan press SCAN again, and press PMSNote that you will now have channels L U in the normal channel sequence. You can delete them or set them to skip. However, if you set them to skip you cannot put the rig into Programmed Scan mode by pressing the PMS key.