The following lines were added (+) and removed (-):
#press ENT and enter the lower frequency limit followed by ENT#Press MCK/W#Turn the MEM/VFO CH dial until "L" is displayed for channel#Long Press MCK/W#press ENT and enter the upper frequency limit followed by ENT#Press MCK/W#Turn the MEM/VFO CH dial until "U" is displayed for channel#Long Press MCK/W#Press the PMS button and "LU" will be displayed for channel#Press SCANTo exit the scan press SCAN again, and press PMSNote that you will now have channels L U in the normal channel sequence. You can delete them or set them to skip. However, if you set them to skip you cannot put the rig into Programmed Scan mode by pressing the PMS key.