The following lines were added (+) and removed (-):
== Programming ====basic usage=====KEYBOARD LOCKING===To lock#Press and hold in the [H/L] key for one second to enter the Set mode.#Rotate the DIAL knob to select Set Mode Item 25: LOCK.#Press the [H/L] key momentarily to enable adjustment of this Item.#Rotate the DIAL knob to choose between one of the locking schemes as outlined above.#When you have made your selection, press the PTT key to save the new setting andreturn to normal operation. To activate the locking feature, press the [F/W] key, then press andhold in the [BAND] key for one second. The “ ” icon will appearon the LCD. To cancel locking, repeat this process. ==Programming==In the user manual the process of programming is under the heading "Cloning" which is meant for transfer of channels and settings from identical units via cable. We can use CHIRP to program with the radio in cloning mode.USING CHIRP(A) GETTING STARTED#With radio off connect cable TRRS to VX-2R and USB to computer. #Open CHIRP#Press and hold in the [F/W] key while turning the radio: "CLONE" will appear on the displayproceed to either (B) or (C) depending on activity(B) DOWNLOAD SETTINGS FROM RADIO TO CHIRP#In CHIRP goto Radio -> Download from Radio and Vender: Yaesu, Model: VX-2 Do not click OK yet#On radio Press the [BAND] key. "TX" will appear on the radio, and the data from this radio will be transferred to CHIRP.(C) PROGRAM RADIO UPLOAD FROM CHIRP TO RADIO##On the Destination radio, press the [V/M] key (“WAIT” will appear on the LCD).