The following lines were added (+) and removed (-):
<small>This first example is taken from another source and contains many unnecessary steps. Skip ahead to the simplified example that we use and have verified works.citation: http://www.brickolore.com/2015/05/qyt-kt8900-dual-band-mobile.html*citation: http://www.brickolore.com/2015/05/qyt-kt8900-dual-band-mobile.html*citation: http://www.miklor.com/KT8900/KT8900-Program.php</small>citation: http://www.miklor.com/KT8900/KT8900-Program.phpHere is a more simplified guide to entering repeater frequencies with offset into a channel memory:# In VFO set the top to the repeater frequency# In VFO set the bottom to the repeater offset# Return to top and press [MENU] + 36 and select your memory channel number and save# In VFO goto the bottom and press [MENU] + 36 and select your memory channel number and saveBy repeating the save, the second being the offset on bottom, stored in the same channel memory, this quirky little radio will now have the repeater freq and offset freq in memory along with any PL tone.