Difference between revisions of "127.0.1.1"

From Free Knowledge Base- The DUCK Project: information for everyone
Jump to: navigation, search
(Created page with "5.1.1. The hostname resolution (Debian Manual): For example, "/etc/hosts" looks like the following. 127.0.0.1 localhost 127.0.1.1 <host_name> Each line starts with a IP a...")
 
m
 
(One intermediate revision by one user not shown)
Line 1: Line 1:
 +
127.0.1.1 is the IP address used by the Debian Linux installer for a computer that does not have a LAN IP address.  It should only be present on a computer that is not connected to a network.  It is NOT a replacement for the loopback interface address 127.0.0.1 as the loopback address should be present on a networked or stand alone machine both.
 +
 
5.1.1. The hostname resolution (Debian Manual):
 
5.1.1. The hostname resolution (Debian Manual):
  
Line 45: Line 47:
 
* Loopback address is still 127.0.0.1
 
* Loopback address is still 127.0.0.1
 
* Hostname can be 127.0.1.1 on a stand alone machine not connected to a network, otherwise the network IP is used
 
* Hostname can be 127.0.1.1 on a stand alone machine not connected to a network, otherwise the network IP is used
 +
 +
[[Category:Computer_Technology]]
 +
[[Category:Linux]]

Latest revision as of 19:33, 27 February 2019

127.0.1.1 is the IP address used by the Debian Linux installer for a computer that does not have a LAN IP address. It should only be present on a computer that is not connected to a network. It is NOT a replacement for the loopback interface address 127.0.0.1 as the loopback address should be present on a networked or stand alone machine both.

5.1.1. The hostname resolution (Debian Manual):

For example, "/etc/hosts" looks like the following.

127.0.0.1 localhost
127.0.1.1 <host_name>

Each line starts with a IP address and it is followed by the associated hostname.

The IP address 127.0.1.1 in the second line of this example may not be found on some other Unix-like systems. The Debian Installer creates this entry for a system without a permanent IP address as a workaround for some software (e.g., GNOME) as documented in the bug #719621.

The <host_name> matches the hostname defined in the "/etc/hostname".

For a system with a permanent IP address, that permanent IP address should be used here instead of 127.0.1.1.

For a system with a permanent IP address and a fully qualified domain name (FQDN) provided by the Domain Name System (DNS), that canonical <host_name>.<domain_name> should be used instead of just <host_name>.

Fedora uses 127.0.0.2 for the same purpose.

The GNOME desktop expects the system hostname to be resolvable to an IP address with a canonical fully qualified domain name.

THIS IS A CHANGE FROM TRADITIONAL FORMAT IN OLDER DISTRIBUTIONS

In the past one might have observe something like this in /etc/hosts

127.0.0.1   localhost myhostname

The modern approach is to have

127.0.0.1   localhost
127.0.1.1   <host_name>

Here is a working example:

127.0.0.1       localhost
127.0.1.1       dilbert

Here the workstation hostname is dilbert. On the same system if you cat /etc/hostname you would see just the host

dilbert

Neither have a fully qualified domain attached to the host, as the workstation is on a private lan with non-routable IP addressing which is most common.

The hostname should be set in /etc/hostname. The fully qualified domain name is determined by the system checking /etc/hosts

You should NOT assign the system hostname to the loopback address of 127.0.0.1

  • Loopback address is still 127.0.0.1
  • Hostname can be 127.0.1.1 on a stand alone machine not connected to a network, otherwise the network IP is used