Difference between revisions of "COM Ports and Related Hardware in Windows"

From Free Knowledge Base- The DUCK Project: information for everyone
Jump to: navigation, search
(New page: == STANDARD COM PORT & MODEM SETTINGS + KERMIT TERMINAL FOR DOS == Typically on 486 hardware with Windows 95: *mouse on com 2 *modem on com 3 Standard COM and LPT port addressing ...)
 
m
Line 26: Line 26:
 
  debug
 
  debug
 
  -d 40:0
 
  -d 40:0
 +
 +
== IDE ADDRESSES (HARDDRIVES AND CD ROM DRIVERS) ==
 +
 +
            address, irq
 +
primary    1F0,    14
 +
secondary  170,    15
 +
tertiary    1E8,    11
 +
quadriary  168,    12
 +
 +
 +
 +
  
 
 
 
 

Revision as of 07:50, 18 July 2007

STANDARD COM PORT & MODEM SETTINGS + KERMIT TERMINAL FOR DOS

Typically on 486 hardware with Windows 95:

  • mouse on com 2
  • modem on com 3

Standard COM and LPT port addressing for Windows 3.1/3.11/95/95OSR2/95OSR2.5/98/98SE

  • onboard com1: 3f8 irq4
  • onboard com2: 2f8 irq3
  • parallel  : 378 irq7

-for more on com ports see "mcom.txt"

MODEM

  • COM: 3 IRQ: 4

HOW TO USE KERMIT TO TEST COM PORTS:

>set po 1 	(set onboard port 1)
>set ba 1200	(set baud 1200)
>c		(terminal mode)
<alt>-X		(exit terminal mode)
1200 good for testing mouse

HOW TO USE DEBUG TO TEST COM PORTS

debug
-d 40:0

IDE ADDRESSES (HARDDRIVES AND CD ROM DRIVERS)

            address, irq
primary     1F0,     14
secondary   170,     15
tertiary    1E8,     11
quadriary   168,     12



 

Retrieved from "http://wiki.robotz.com/index.php?title=COM_Ports_and_Related_Hardware_in_Windows&oldid=921"