Difference between revisions of "2002 Mitsubishi Lancer"

From Free Knowledge Base- The DUCK Project: information for everyone
Jump to: navigation, search
m (→‎replacing serpentine belts)
 
(22 intermediate revisions by one user not shown)
Line 1: Line 1:
 +
[[Image:2002 Lancer OZ Rally.gif]]
 +
 
All Lancers of this year have a 120-hp 4-cyl engine with manual or automatic transmission.  
 
All Lancers of this year have a 120-hp 4-cyl engine with manual or automatic transmission.  
  
Line 11: Line 13:
 
== 2002 MITSUBISHI LANCER OZ RALLY ==
 
== 2002 MITSUBISHI LANCER OZ RALLY ==
  
 +
The O.Z Rally Edition has some of the look of the Evolution, including real alloy wheels made by racing supplier O.Z, for a fraction of what Mitsubishi would have to sell a real Evo for. 
 +
 +
[[Image:2002 Lancer OZ Rallyxxx.jpg]]
 +
 +
SPECIFICATIONS
 +
 +
2002 Mitsubishi Lancer O.Z Rally Edition
 +
 +
Base Price              $ 15,487
 +
Price As Tested        $ 16,392
 +
Engine Type            single overhead cam 16-valve inline four-cylinder
 +
Engine Size            2.0 liters / 120 cu. in.
 +
Horsepower              120 @ 5500 rpm
 +
Torque (lb-ft)          130 @ 4250 rpm
 +
Transmission            5-speed manual
 +
Wheelbase / Length      102.4 in. / 177.6 in.
 +
Curb Weight            2701 lbs.
 +
Pounds Per Horsepower  22.5
 +
Fuel Capacity          13.2 gal.
 +
Fuel Requirement        unleaded regular, 87 octane
 +
Tires                  P 195/60 TR15 Goodyear Eagle LS
 +
Brakes, front/rear      vented disc / drum
 +
Suspension, front/rear  independent MacPherson strut / independent multilink
 +
Drivetrain                front engine, front-wheel drive
 +
 +
PERFORMANCE
 +
EPA Fuel Economy - miles per gallon
 +
    city / highway / observed      26 / 33 / 27
 +
0 to 60 mph            est. 9.0  sec
  
 
== Parts All Models ==
 
== Parts All Models ==
Line 17: Line 48:
  
 
[[Image:serpentine belts for mitsubishi lancer 2000cc.gif]]
 
[[Image:serpentine belts for mitsubishi lancer 2000cc.gif]]
 +
 +
=== headlamp ===
 +
 +
The headlight bulb contains both the high and low beam filaments. The Mitsubishi Lancers made from 2002 to 2010 use the same bulb.
 +
 +
[[File:2002_Mitsubishi_Lancer-Headlight9007.jpg]]<BR>Pictured is the Sylvania HB5 9007 (Part Number: 9007BP) which retails for under $12.00 each.
 +
 +
HB5/9007 SERIES HALOGEN HEADLIGHT BULB
 +
* 9007 bulb type
 +
* C-8 filament type
 +
* PX29T base type
 +
* 12 volts
 +
 +
== Service ==
 +
 +
=== Quick Oil Change Notes ===
 +
* <big>4 Quarts '''SAE 5W-30''' Valvoline Premium Conventional Motor Oil</big> (or 3½, do not overfill)
 +
* <big>FRAM Extraguard '''PH7317'''</big>
 +
* 17mm hex oil drain plug
 +
 +
''note: If you observe shiny specks in the drained oil, they may be metal flakes and could mean that there is a serious problem with the engine.''
 +
 +
''note: After draining the oil, when you replace the plug, only tighten the drain plug until it is snug. Over-tightening the oil drain plug can strip the threads or crack the oil pan.''
 +
 +
=== Extended Information ===
 +
2002 MITSUBISHI LANCER 2.0L 4-cyl Engine Code [E] 
 +
 +
LUBRICANTS & FLUIDS:
 +
 +
* Engine Oil Grade 1......SL
 +
:* Maximum Performance SAE 5W-30 Signature Series 100% Synthetic Motor Oil (ASLQT)
 +
:* Performance Plus XL 5W-30 Synthetic Motor Oil (XLFQT)
 +
:* Performance OE 5W30 Synthetic Motor Oil (OEFQT)
 +
::* Above 0 F......10W-30 ( SAE 5W-30 is preferred )
 +
::* Below 100 F......5W-30 ( SAE 5W-30 is preferred )
 +
* Automatic Transmission,F4A42-1......SLF ( Mitsubishi Diamond SP-III ATF, or equivalent )
 +
:* Synthetic Multi-Vehicle Automatic Transmission Fluid (ATFQT)
 +
* Fluids
 +
:* Power Steering Fluid......PS
 +
::* Power Steering Fluid (PSFCN)
 +
 +
2002 MITSUBISHI Lancer 4-2.0L F/inj. (16V) SOHC 4G94 (E)
 +
{|
 +
|+
 +
Brand: FRAM
 +
|-
 +
|Part Type || Part
 +
|-
 +
|FRAM XTENDEDGUARD || XG7317
 +
|-
 +
|FRAM TOUGHGUARD || TG7317
 +
|-
 +
|FRAM HIGHMILEAGE || HM7317
 +
|-
 +
|FRAM DOUBLEGUARD || DG7317
 +
|-
 +
|'''FRAM EXTRAGUARD''' || '''PH7317'''
 +
|-
 +
|FRAM EXTRAGUARD AIR FILTERS || CA8208
 +
|}
 +
 +
=== Jack and Jack Stand Placement ===
 +
 +
The lift point for changing the oil is on the passenger side of the car, below the rocker panel and just behind the front wheel.  See the following illustrations:
 +
 +
[[File:mitsubishi-lancer01.jpg]]
 +
 +
[[File:mitsubishi-lancer02.jpg]]
 +
 +
== Repair ==
 +
 +
=== Stuck or Sticking Brake Caliper ===
 +
Calipers do seize up, the pistons mostly. If there are a lot of miles on the vehicle (60,000 miles) and a caliper seizes, the one on the other side will follow shortly. Consider replacing them both. Two other possibilities are: guide pins not sliding for some reason, flexible brake hose collapsed internally. Replace all.  The flex brake lines do become restricted, causing the caliper to delay in retracting, or sticking. 
 +
 +
Use non oil based synthetic brake lubricant.  Don't let the caliber hang from the hose while you are working.  Watch out for some replacement calibers, they may, or may not, have pins with them. Avoid brake calipers that have [[phenolic pistons]].
 +
 +
IMPORTANT: Remove cap from brake fluid reservoir to relieve pressure on caliper.  If you don't do this you won't be able to separate the compressed caliper, especially if it is stuck!
 +
 +
They say ''when replacing the caliper make sure you know the torque specifications for: pins, caliber bracket, banjo nut, lug nuts.''  **some expansion on this is necessary...
 +
 +
=== replacing the brakes and rotors ===
 +
Remove wheels.  Reference [[Disc Breaks]] for a general guide to removing the pads and calipers.  Remove the brake caliper bolts and hang the calipers to keep the weight off the brake line hose. Remove the caliper supports:
 +
 +
[[File:mitsubishi_lancer_caliper_02.gif]]
 +
 +
See rotor assembly.  Be aware there may be a small phillips screw holding it to the hub.
 +
 +
[[File:mitsubishi_lancer_hub_02.gif]]
 +
 +
=== replacing wheel bearings ===
 +
Remove the axle nut, lower ball joint nut and separate the ball joint from the knuckle. Pull the axle from the hub but not the transmission. Unbolt the brake hose from the knuckle and the knuckle from the strut. Press the hub from the bearing and remove the bearing snap-ring. Press the bearing from the knuckle and press the new bearing into the knuckle, install the snap-ring. Cut the inner race from the hub and support the bearing inner race and press the hub into the bearing. Reassemble the knuckle to the strut, the axle to the hub and the ball joint to the knuckle. Torque the axle-nut. Install the rotor to the hub and the caliper support to the knuckle.
 +
 +
[[File:mitsubishi_lancer_rotors_02.gif]]
 +
 +
=== replacing serpentine belts ===
 +
 +
There are two serpentine belts on this car.  You will need a 12mm and 14mm sized wrench.  Removal of the primary serpentine belt is necessary to access the rear belt.  The rear belt is for the alternator only.
 +
 +
  
 
&nbsp;
 
&nbsp;
  
 
[[Category:Automotive]]
 
[[Category:Automotive]]
 +
[[Category:Tangible Product]]

Latest revision as of 19:15, 5 October 2024

2002 Lancer OZ Rally.gif

All Lancers of this year have a 120-hp 4-cyl engine with manual or automatic transmission.

LancerL4 - 2.0L 2000cc - MFI GAS SOHC

  • MSRP: $13,897 -$16,287
  • Invoice: $13,032 -$15,274
  • Fuel Economy: 24 MPG City / 30 MPG Highway


2002 MITSUBISHI LANCER OZ RALLY

The O.Z Rally Edition has some of the look of the Evolution, including real alloy wheels made by racing supplier O.Z, for a fraction of what Mitsubishi would have to sell a real Evo for.

2002 Lancer OZ Rallyxxx.jpg

SPECIFICATIONS

2002 Mitsubishi Lancer O.Z Rally Edition 

Base Price              $ 15,487
Price As Tested         $ 16,392
Engine Type             single overhead cam 16-valve inline four-cylinder
Engine Size             2.0 liters / 120 cu. in.
Horsepower              120 @ 5500 rpm
Torque (lb-ft)          130 @ 4250 rpm
Transmission            5-speed manual
Wheelbase / Length      102.4 in. / 177.6 in.
Curb Weight             2701 lbs.
Pounds Per Horsepower   22.5
Fuel Capacity           13.2 gal.
Fuel Requirement        unleaded regular, 87 octane
Tires                   P 195/60 TR15 Goodyear Eagle LS
Brakes, front/rear      vented disc / drum
Suspension, front/rear  independent MacPherson strut / independent multilink
Drivetrain                front engine, front-wheel drive

PERFORMANCE 

EPA Fuel Economy - miles per gallon
   city / highway / observed      26 / 33 / 27
0 to 60 mph            est. 9.0  sec

Parts All Models

serpentine belts

Serpentine belts for mitsubishi lancer 2000cc.gif

headlamp

The headlight bulb contains both the high and low beam filaments. The Mitsubishi Lancers made from 2002 to 2010 use the same bulb.

2002 Mitsubishi Lancer-Headlight9007.jpg
Pictured is the Sylvania HB5 9007 (Part Number: 9007BP) which retails for under $12.00 each.

HB5/9007 SERIES HALOGEN HEADLIGHT BULB

  • 9007 bulb type
  • C-8 filament type
  • PX29T base type
  • 12 volts

Service

Quick Oil Change Notes

  • 4 Quarts SAE 5W-30 Valvoline Premium Conventional Motor Oil (or 3½, do not overfill)
  • FRAM Extraguard PH7317
  • 17mm hex oil drain plug

note: If you observe shiny specks in the drained oil, they may be metal flakes and could mean that there is a serious problem with the engine.

note: After draining the oil, when you replace the plug, only tighten the drain plug until it is snug. Over-tightening the oil drain plug can strip the threads or crack the oil pan.

Extended Information

2002 MITSUBISHI LANCER 2.0L 4-cyl Engine Code [E]

LUBRICANTS & FLUIDS:

  • Engine Oil Grade 1......SL
  • Maximum Performance SAE 5W-30 Signature Series 100% Synthetic Motor Oil (ASLQT)
  • Performance Plus XL 5W-30 Synthetic Motor Oil (XLFQT)
  • Performance OE 5W30 Synthetic Motor Oil (OEFQT)
  • Above 0 F......10W-30 ( SAE 5W-30 is preferred )
  • Below 100 F......5W-30 ( SAE 5W-30 is preferred )
  • Automatic Transmission,F4A42-1......SLF ( Mitsubishi Diamond SP-III ATF, or equivalent )
  • Synthetic Multi-Vehicle Automatic Transmission Fluid (ATFQT)
  • Fluids
  • Power Steering Fluid......PS
  • Power Steering Fluid (PSFCN)

2002 MITSUBISHI Lancer 4-2.0L F/inj. (16V) SOHC 4G94 (E)

Brand: FRAM
Part Type Part
FRAM XTENDEDGUARD XG7317
FRAM TOUGHGUARD TG7317
FRAM HIGHMILEAGE HM7317
FRAM DOUBLEGUARD DG7317
FRAM EXTRAGUARD PH7317
FRAM EXTRAGUARD AIR FILTERS CA8208

Jack and Jack Stand Placement

The lift point for changing the oil is on the passenger side of the car, below the rocker panel and just behind the front wheel. See the following illustrations:

Mitsubishi-lancer01.jpg

Mitsubishi-lancer02.jpg

Repair

Stuck or Sticking Brake Caliper

Calipers do seize up, the pistons mostly. If there are a lot of miles on the vehicle (60,000 miles) and a caliper seizes, the one on the other side will follow shortly. Consider replacing them both. Two other possibilities are: guide pins not sliding for some reason, flexible brake hose collapsed internally. Replace all. The flex brake lines do become restricted, causing the caliper to delay in retracting, or sticking.

Use non oil based synthetic brake lubricant. Don't let the caliber hang from the hose while you are working. Watch out for some replacement calibers, they may, or may not, have pins with them. Avoid brake calipers that have phenolic pistons.

IMPORTANT: Remove cap from brake fluid reservoir to relieve pressure on caliper. If you don't do this you won't be able to separate the compressed caliper, especially if it is stuck!

They say when replacing the caliper make sure you know the torque specifications for: pins, caliber bracket, banjo nut, lug nuts. **some expansion on this is necessary...

replacing the brakes and rotors

Remove wheels. Reference Disc Breaks for a general guide to removing the pads and calipers. Remove the brake caliper bolts and hang the calipers to keep the weight off the brake line hose. Remove the caliper supports:

Mitsubishi lancer caliper 02.gif

See rotor assembly. Be aware there may be a small phillips screw holding it to the hub.

Mitsubishi lancer hub 02.gif

replacing wheel bearings

Remove the axle nut, lower ball joint nut and separate the ball joint from the knuckle. Pull the axle from the hub but not the transmission. Unbolt the brake hose from the knuckle and the knuckle from the strut. Press the hub from the bearing and remove the bearing snap-ring. Press the bearing from the knuckle and press the new bearing into the knuckle, install the snap-ring. Cut the inner race from the hub and support the bearing inner race and press the hub into the bearing. Reassemble the knuckle to the strut, the axle to the hub and the ball joint to the knuckle. Torque the axle-nut. Install the rotor to the hub and the caliper support to the knuckle.

Mitsubishi lancer rotors 02.gif

replacing serpentine belts

There are two serpentine belts on this car. You will need a 12mm and 14mm sized wrench. Removal of the primary serpentine belt is necessary to access the rear belt. The rear belt is for the alternator only.


 

Retrieved from "http://wiki.robotz.com/index.php?title=2002_Mitsubishi_Lancer&oldid=22837"