Difference between revisions of "Talk:Zastone KT-8900 Mini Dual Band Transceiver"

From Free Knowledge Base- The DUCK Project: information for everyone
Jump to: navigation, search
(Created page with "==Program instructions for repeater use== <small>This first example is taken from another source and contains many unnecessary steps. Skip ahead to the simplified example th...")
 
(No difference)

Latest revision as of 20:44, 2 June 2016

Program instructions for repeater use

This first example is taken from another source and contains many unnecessary steps. Skip ahead to the simplified example that we use and have verified works.

set radio to VFO MODE by pressing [V/M] Press [Exit A/B] to put radio in Top or Bottom freq use top freq as RX freq and Bottom Freq as TX freq. 

1 - push exit A/B XXX XXX (RX)
2 - push exit A/B XXX XXX (TX)
3 - push exit A/B back to top
4 - [Menu] 1 step freq [menu] [up] to 25.00k [menu]
5 - [up]#13 T-CTCS [menu] [up] 131.8 [menu]
6 - [up] #36 [menu] 001 (key 001 ) [menu]
7 - [up] #37 [menu] 199 (key 199 ) [menu]
8 - [up] #38 [menu] [up] + [menu] <------ this is your freq offset + - simplex area.
9 - [up] #39 [menu] key in 05000 [menu]
10 - [exit A/B] to exit the menu programing
11 - [exit A/B] lower TX freq (XXX XXX )
12 - menu #39 [Menu] offset key in 05000[menu]
13 - [down] #38 [menu] [up] + [menu] <----- this is your freq offset + - simplex area.
14 - [down] #36 [menu] key in 001 for your channel [menu]
15 - [down] #13 [menu] make sure proper tone is there 131.8
16 [V/M] up down key to channel 1 and key up repeater ! this should work if not let me know

Retrieved from "http://wiki.robotz.com/index.php?title=Talk:Zastone_KT-8900_Mini_Dual_Band_Transceiver&oldid=13301"