Difference between revisions of "Macintosh iMac Boot Issues"
(Created page with "* Gray Screen Startup * Mac Stalls on Gray Screen The problem is characterized by the display changing from the blue screen that occurs at power up to a gray screen (or blac...") |
m |
||
| Line 11: | Line 11: | ||
#Make sure you remove the Ethernet cable, audio in/out cables, headphones, and any other peripherals. | #Make sure you remove the Ethernet cable, audio in/out cables, headphones, and any other peripherals. | ||
#Restore power, turn the Mac back on again | #Restore power, turn the Mac back on again | ||
| + | |||
| + | Now you can connect things one at a time and reboot to determine which hardware via process of elimination | ||
| + | |||
| + | == System settings (BIOS Equivalent) reset == | ||
| + | Mac doesn't use BIOS / CMOS like the PC even though Mac now uses the same processor family. They call it PRAM. The differences between [[BIOS Versus PRAM]] can be read about while the functionality is only relevant on this case because we want to reset these settings. Resetting the PRAM and the SMC returns your Mac's hardware to its default settings. | ||
| + | |||
| + | To reset PRAM: | ||
| + | # Immediately press and hold the following keys: command+option+P+R. Continue to hold down the four keys for a long duration while the Mac resets them and then reboots. | ||
| + | # Do not release keys until you hear the second startup chime. | ||
| + | |||
| + | You can also reset from the command prompt (this process is like the Cisco family of routers) | ||
| + | # From console type | ||
| + | nvram -c | ||
| + | To reset System Management Controller: | ||
| + | * resetting a Mac's SMC depends on the type of Mac | ||
| + | # Power off the Mac | ||
| + | # Press and hold the power button for 10 seconds. Release the power button and wait a few seconds. Press the power button again to turn on the Mac. | ||
| + | |||
| + | Or you might have to open the mac up (remove cover) and do this... | ||
| + | # Turn off Mac, unplug, then pop the top and look for a small button that reads SMC under the Drive 4 sled near top PCI-e slot. | ||
| + | # Press and hold this button for 10 - 20 seconds. | ||
| + | # Plug the mac back into AC power, wait 30 seconds, then power on | ||
| + | |||
| + | == howto: safe boot == | ||
| + | |||
| + | #Shut down your Mac. | ||
| + | #Press and hold the shift key. | ||
| + | #Start up your Mac. | ||
| + | #Release the shift key once you see the login window or the desktop. | ||
| + | |||
| + | == howto: repair the startup drive == | ||
| + | |||
| + | == operating system and system restore == | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | [[File:macbookapple.jpg]] | ||
| + | |||
| + | [[Category:Computer Technology]] | ||
| + | [[Category:Macintosh]] | ||
| + | [[Category:Security]] | ||
Revision as of 10:53, 18 November 2019
- Gray Screen Startup
- Mac Stalls on Gray Screen
The problem is characterized by the display changing from the blue screen that occurs at power up to a gray screen (or black on more recent models) and delayed or froze on said screen.
Contents
possible culprit: bad device or peripheral
Disconnect all external peripherals, and keep them removed for the duration of these steps unless otherwise noted.
- Turn off your Mac by pressing and holding the power button to force it down.
- Make sure you remove the Ethernet cable, audio in/out cables, headphones, and any other peripherals.
- Restore power, turn the Mac back on again
Now you can connect things one at a time and reboot to determine which hardware via process of elimination
System settings (BIOS Equivalent) reset
Mac doesn't use BIOS / CMOS like the PC even though Mac now uses the same processor family. They call it PRAM. The differences between BIOS Versus PRAM can be read about while the functionality is only relevant on this case because we want to reset these settings. Resetting the PRAM and the SMC returns your Mac's hardware to its default settings.
To reset PRAM:
- Immediately press and hold the following keys: command+option+P+R. Continue to hold down the four keys for a long duration while the Mac resets them and then reboots.
- Do not release keys until you hear the second startup chime.
You can also reset from the command prompt (this process is like the Cisco family of routers)
- From console type
nvram -c
To reset System Management Controller:
- resetting a Mac's SMC depends on the type of Mac
- Power off the Mac
- Press and hold the power button for 10 seconds. Release the power button and wait a few seconds. Press the power button again to turn on the Mac.
Or you might have to open the mac up (remove cover) and do this...
- Turn off Mac, unplug, then pop the top and look for a small button that reads SMC under the Drive 4 sled near top PCI-e slot.
- Press and hold this button for 10 - 20 seconds.
- Plug the mac back into AC power, wait 30 seconds, then power on
howto: safe boot
- Shut down your Mac.
- Press and hold the shift key.
- Start up your Mac.
- Release the shift key once you see the login window or the desktop.
howto: repair the startup drive
operating system and system restore
