Kenwood TM-241A

From Free Knowledge Base- The DUCK Project: information for everyone
Revision as of 21:11, 10 September 2018 by Admin (Talk | contribs)

Jump to: navigation, search

VFO Control

Select CTCSS Tone

  1. Long-press the F key. The F indicator will flash.
  2. Press the TONE/T.ALT button
  3. Turn dial to select PL tone.
  4. Once correct tone selected, short-press F key to accept.

Programming

  1. Press the [VFO] key to select the VFO operating mode
  2. Select the frequency, tone, offset
  3. Press the [F] key. The [F] indicator and a channel memory number will be displayed.
  4. Select the memory channel to store the frequency in.
  5. Press the [MR/M] button within 10 seconds. If you hear a long beep, and the F indicator and channel indicator go away then the program was successful.
Retrieved from "http://wiki.robotz.com/index.php?title=Kenwood_TM-241A&oldid=16799"