Talk:RF Connector Index 1

Connector insulation

siver/silver/teflon or silver/nickle/phenolic

bakelite - is this the same as phenolic?

polystyrene or polyethylene insulators melt when heat applied from soldering

Delrin insulating material is a little better but still can get soft at soldering temperature.

Teflon insulating material is very good and are increasingly available.

phenolic insulating material that was very good at soldering temperature.

• https://www.w0qe.com/Technical_Topics/uhf_connector_compensation.html

Don't use cheap nickel plated connectors, use PL-259 connectors which are silver plated and the connector metal is machined brass. They should also have a silver center pin. Insulator should be Teflon.

Connector Materials

Plating: Nickel, Silver, Gold

Dielectric: Teflon, Phenolic, plastic

UHF Specifications

UHF Specifications
--------------------------------------------------------------------------------
* Electrical 	 
    Impedance: Variable
    Frequency Range: 0-300MHz
    Voltage Rating: 500 volts peak
--------------------------------------------------------------------------------
* Environmental 	 
    Temperature Range 	 
      Mica-Filled Phenolic Insulators: -55⁰C to 149⁰C
      TFE Insulators: -65⁰C to 165⁰C
      Copolymer of Styrene and Polystyrene Insulators: -55⁰C to 85⁰C
      Weatherproof: Except as noted, all UHF are non-weatherproof
--------------------------------------------------------------------------------