Yaesu FT-7800R

From Free Knowledge Base- The DUCK Project: information for everyone
Revision as of 20:56, 19 November 2017 by Ke0etz (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

CTCSS Operation

CTCSS setup involves two actions: setting the Tone Mode and then setting of the Tone Frequency. These actions are set up by using the [TONE(REV)] key and Set mode #44 (TN FRQ).

  1. Press the [ TONE ( REV )] key several times, so that "ENC" appears on the display
  2. press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode, then rotate the DIAL knob to select Menu #44 (TN FRQ). This Menu selection allows setting of the CTCSS tone frequency
Retrieved from "http://wiki.robotz.com/index.php?title=Yaesu_FT-7800R&oldid=16194"